Beretta Web - Beretta Pistol model 1923 9mm

Beretta 92 History | Beretta 92 DeLuxe | Beretta Billenium | Beretta 90-TWO | Beretta 92 | Beretta 92S | Beretta 92SB
Beretta 93R | Beretta Target | Beretta 92 Combat | Beretta 92 .22LR Kit | Beretta 92A1 | Beretta Vertec Steel | Beretta 92 Gost
Beretta 418 | Beretta 1931-1934 | Beretta 1934 | Beretta 70 series | Beretta 90 | Beretta 950 | Beretta 9000
Beretta 80 Series | Beretta 86 | Beretta 89 | Beretta U22 | Beretta 8000 | Beretta 51 | Beretta Olympic
Beretta CX4 | Beretta PX4 | Beretta PX4 SC | Beretta RX4 | Beretta PX4 .45ACP SD |
Beretta 412 series | Beretta A300 | Beretta 1200 | Beretta Pump Guns | Beretta SO series | Beretta SO5 | Beretta UGB25
Beretta 91 | Beretta MAB series | Beretta PM12 S2 |

Beretta Web - Beretta model 1923 9mm Glisenti

Unofficial Beretta Site

...

As a follow up to manufacturing Model 1922 Beretta decided to produce another weapon, maintaining many of the proven good characteristics of earlier models and providing it with significant improvements. Above all it had to be chambered far the 9 mm Model 1910 (Glisenti) cartridge, that is to soy able to load Army ordinance cartridge. The decision to put Mode] 1923 into production was most probably based on Beretta's intention to make a strong effort to ent9r the military market which hod been barely penetrated with Potent 1915 pistols. In actual fact Model 1923 was not to have the success hoped for because we know that only around 10,000 pistols were produced. To us this seems to had had two fundamental reasons:

1) The Army, which had just fought a victorious war that, however, hod badly affected the economy, did not hove sufficient funds available to modernize its weapons even if it concerned a relatively small expenditure such as for acquiring ordnance pistols; it is however possible that a need was somehow felt because its equipment consisted of too large a variety of models and caliber, ranging from semiautomatics cal. 7.65 mm produced in Spain, to Italian Ordinance 10.4 mm revolvers, to Brixia and Glisenti col. 9 mm semiautomatics. Latter were the officially adopted ones;

2) the mistake to maintain 9 mm Glisenti cartridge and to build Model 23 around it.

  Beretta mod. 1923 rh

Mechanically this weapon possessed all the features of simplicity and reliability that would characterize the much more fortunate Model 1934. But, regrettably, the adopted col. mode, the weapon become over sized. This happened because the 9 mm Model 1910 wars in o way, in the field of ammunitioning, a product of the habitual Italian art of compromise.The cartridge was not actually powerful enough to require a locked breech. Nor was it so weak to allow for a significant mechanical simplification. The result was e large size pistol, but not giving a proportionate ballistic performance.Besides, the cartridge hod the some measurements as the 9 mm Parabellum and therefore was o source of dangerous misunderstandings on the port of less experienced users. Although Pietro Beretta hod affirmed in his letter doted 7 September 1935, to FARE in Terni, that Model 23 pistols could function with all «normal 9 mm» cartridges, we could see that cracks in hammers, as they hod occurred in a number of these weapons, ore attributable to the 9 mm Parabellum with consequent risks to the person that had fired.

On the other hond the Beretta Model 1923 provided o useful study object far successive models. Disregarding the dimensions and the form of some details, it was practically identical to future Model 1931.

 

Beretta mod. 1923 Book

 

A highly informative, comprehensive study of Beretta pistols.

A book for collectors and enthusiasts.

EDITORIALE OLIMPIA

 

Although the slide still showed the working «Beretta Pistol Patent 1915 19 19», indicating its origin, Model 1923 concerned a major change from the Potent 1915 pistol. However, Marengoni's conceptions philosophy remained unchanged.
The first end foremost innovation was the external hammer. This solution presented doubtless advantages such as, far instance, the possibility to repeat firing in case of misfire.

Another improvement was added by adopting a positive disconnection, controlled by movements of the slide. The fact was that the old style slip off disconnector had the great defect of allowing the hammer to fall even when the breech-block was not completely closed. This could cause insufficient percussion with consequent jamming of the weapon. Or, especially when using cartridges more powerful than 7.65 mm Browning, like 9mm Glisenti, it could provoke on explosion of the cartridge case, or at least its deformation.

Because of the (relative) power of the cartridge, Model 1923 pistol was provided with a recoil shock absorbing system, consisting of a fibre disc in the some position and with the some function as the larger buffer spring of the Potent 1915 col. 9 mm.

 

Beretta mod. 1923 Brad Taylor

Grips could be either of wood, with the Beretta monogram in metal placed on the lower part, or of pressed steel in away similar to that of Model 1922.

One of the features of Model 1923 consisted of the possibility to use o shoulder stock holster. Ws was mode, with the usual practicality that distinguished Marengoni, in o manner that ensured minimum weight and awkwardness. The shoulder-stock holster was attached on horizontal millings at the base of the butt where it was not covered by the lower end of the grips. It was actually o holster mode of leather. Along its spine o small metal bar was riveted that could fold.

Of the 10,000 Model 1923 pistols mode in series, on unknown number was mode with the attachment for the shoulder stock holster. These latter received random numbers allocated lo that series. This would confirm our opinion that this version had somehow been fitted into normal production at intervals dictated by demand.

Il seems however that the number of pistols produced with the attachment increased during the latter port of production. It is probable, since the stock holster was named Model 1924, that those mode during the first year had not been so equipped.

 

 

 

 

 

 

 

 

  Beretta mod. 1923  RH Richard

Model 1923 was never to hove on adjustable rear sight, probably on account of its little usefulness, especially as it was a pistol of which the ballistic performance certainly bore no comparison with that of a Mouser 1896.

3,007 exemplars of Model 1923 were sold to the Italian Royal Army. The first seven (as per contract drown up on 7 October 1933) were required for evolution purposes on the port of FARE in Terni. The remaining 3,000 (as per contract no. 5043, drown up on 29 April 1936) probably emptied the Beretta warehouse in Brescia of a model that had little success. These pistols show the proof mark RE (Reqio Esercito)

It is really very difficult to understand how the Italian Royal Army could hove decided on this purchase only two months before a contract was signed for 150,000
pistols of Model 1934. This model was much more modern and functional, and above all manufactured with an eye to the use of o different type of ammunition.

One of the possible, though not very plausible, explanations could be that the Army still possessed many Model 1910 pistols with matching ammunition that had to be removed from service. Another possibility is that they had been earmarked for use by colonial troops since some of Model 1923 pistols had in fact already been sold to the Colonial Office in 1926.

 

 

 

  Beretta mod. 1923  LH Richard

It is to be hoped that the acquisition had not been decided on by taking as gospel truth Beretta's affirmation that It could shoot with 9 mm Parabellum. This, as photos demonstrate, was rather dangerous if the unlucky and little experienced user had been provided with 9 mm Model 1938 (9M38) cartridges, the very powerful Italian ordinance cartridges having substituted the 9 mm Glisenti Model 1910 ones. In this manner the Italian Royal Army found itself with four different kinds of ammunition for small arms: 10,35 mm Italian Ordinance - for Revolver Model 89 was still produced by Bernardelli in the 30s - 7.65 mm BrownIng for Models 1917, 1922, 1931 and 1935, 9 mm Short for Model 1934 and 9mm Model 1910 for Glisenti, Brixia and Model 1923 pistols.

If furthermore the purchase of Patent 1919 col. 6.35 mm pistols is taken into consideration, even if this weapon had not been officially adopted, one con only admire without reservation the way in which officers and non-commissioned officers, in Italian fashion, found o way out of this maze.

The Fascisit Forestal Militia bought 250 pistols of Model 1923 in 1935. Of these, 100 were equipped with shoulder stock holster Model 1924. In this case, too, there is the mark of relevant unit.

It also seems that 4,000 pistols of Model 1923 were sold to Bulgaria in 1926. Another 600 found their way to Argentina to supply to Police of Buenos Aires Province. However, we do not have definite information on these two lots except o photograph of an exemplar shipped to Argentina. They do not appear to hove been given o separate series numbering.

Beretta registers furthermore show that, in 1931, 25 pistols were sold lo the Turkish Navy which, contrary to the Italian Royal Army, did not place any follow up orders.

Between 1928 and 1932 about a dozen Model 1923 pistols were bought by the Duke of the Abruzzi and by His Majesty's Royal Household. These had probably been engraved and gilded pistols, o number of which somehow escaped destruction. Large numbers were sold on the commercial market, particularly through the armories of` Ravizza in Milan, Marte in Bologna ond Angelini in Trieste. Some were used for target shooting practice in Ferrara, Trieste and Rome. The lost serial number found in the registers was 310400.

    Beretta mod. 1923  duca logo Richard

General specifications

Caliber / cartridge: 9 mm Glisenti
Operation: blowback, semiautomatic, single action
Hammer: external
Length:163 mm
Height :132 mm
Thickness :28.5 mm
Weight (with empty magazine): 880 gr
Barrel length : 98 mm
Rifling : RH 6 grooves pitch 240 mm
Front sight :blade. integral with slide
Rear sight : V shape, integral with slide
Sighting line : 125 mm
Safeties :
Manual, lever
Feeding : detachable box
Magazine capacity : 8 cartridges
Start of production : 1923
End of production : 1925 (?)
Quantity produced : 10.400
Serial numbers : from 300000 to 310400

   

 

 

 

 
 
Stat | Site Map | Links | Contact Us | ©2009 BERETTAWEB.com